System warranty and disclaimer
This equipment is designed to operate properly and produce rated capacity when installed in accordance with accepted industry standards. Failure to meet the following conditions may result in voiding of the system warranty:
- System piping must be installed following industry standards for good piping practices.
- Inert gas must be charged into piping during welding.
- System must be thoroughly leak-checked and evacuated before initial charging.
- As standard, the electrical connections must comply with the following
conditions:
- Voltages must not exceed ±5 % of nameplate ratings. The frequency is 50-60 Hz.
- Factory installed wiring must not be changed without written approval from Alfa LU-VE
Caution: Follow these instructions to guarantee safe and correct
installation, service and use of AlfaSolar S/SR™ series. Do not change or repair the
unit without the manufacturer´s permission and instructions. The neglect to follow
the instructions may result in warranty expiration.
Disclaimer
This Instruction Manual applies to all AlfaSolar S/SR™ air cooled liquid coolers and is supplied in combination with the Air Cooled Liquid Coolers Product Manual AHE00050. Both manuals must be carefully examined and instructions should be followed up at all times. Alfa LU-VE does not accept liability for any damage resulting from non-compliance to the instructions as given in the manuals and order-related documents.