High mounting legs
Height [m] | Description | Availability |
---|---|---|
1 | 1 m leg extensions are fitted to the standard leg. The extensions are delivered loose. | S/SR |
2 | 2 m legs are delivered loose. | SR |
3 | 3 m legs are delivered loose. | SR |
4 | 4 m legs are delivered loose. | SR |
![](../figures/installation_of_leg_extension.png)
- Slide the extensions over the standard legs.
- Install the vertical leg supports with M10 grade 8.8 bolts.
The required M10 bolts, nuts and spring washers are included in the delivery.
Control cabinets with 2 m and 4 m legs are delivered loose. The legs are fitted at ground level.
See separate instructions for installing the AlfaSolar SR™ series high mounting legs (2 m, 3 m and 4 m legs).
Check the actual wind load and EQ classification from the datasheet.
The amount of legs and support beams depends on the local wind and snow loads and earthquake classification (special options). For greater environmental loads, the order specific stress calculations with additional support beams and legs are available.
High mounting legs are part of the machine and according to the EN1090-1 standard, they do not require CE-marking.
Standard surface treatment: Hot-Dip Galvanized.
All painting options are available according to the painting specification.
![](../figures/high_mounting_leg_inst.png)