Packing

The following loose deliveries are always fastened to the pallet:
Option: Counter flanges and gaskets Wooden box installed to the pallet
Option: Vibration dampers Installed to the pallet
Option: Expansion joints and gaskets Wooden box installed to the pallet

The standard truck pallet has two protection options: Hardboard coil protection and upper part fastening protection.

Figure: Upper part fastening protection (left) and hardboard coil protection (right)

When possible, high mounting legs are delivered on the pallet below the unit. Otherwise, the legs are delivered separately.

Note: Do not lift the unit with the pallet when high mounting legs are mounted on the pallet.
Figure: High mounting legs packing arrangement for truck and container transport
Figure: Container package only for Solar SR™

A wooden box protects the liquid cooler in the best way during long-term storage. If possible, store the packages in a dry room with even temperature. If you store the liquid cooler outdoors, make sure that there is no snow or other substance on the package to avoid impressions, water-logging or decay, and to prevent water running into the package. Also make sure that the vent holes on the package are clean to enable inside moisture evaporation. If there is moisture between the liquid cooler and the plastic cover, white rust forms on the hot dip galvanized surfaces. Often this is an esthetic deficit only.

Figure: Wooden box available only for AlfaSolar SR™

WARNING:

To avoid the falling of a wooden box (optional for Solar SR™):

  • Stack max 3 units on top of the other.
  • Place the packages in line.

Always store the packages on a level surface.

See Wooden box available only for AlfaSolar SR™.